Buddha Crystal Cave LED Backflow Incense Burner

A meditating Buddha sits within a sparkling crystal cave on this eye-catching backflow incense cone burner. An LED cycles through a rainbow of light colours, perfectly showcasing the flowing smoke and Buddha figure. To use, simply place a backflow incense cone on top of the burner and watch as the smoke falls below. Bottom on/off switch. 2 AA batteries required.

Dimensions: H15cm x W10cm x D10cm

Backflow incense smoke flows down through a backflow burner and creates a mist around the product. When backflow incense burns, the mist it creates can leave a light residue on the burner and the surface the burner is placed on. This is from natural oils and resins within the incense and can be wiped clean with a damp cloth. Therefore it is advised that the burner always be placed on a heatproof surface. Never leave burning incense unattended.

IMPORTANT:

The hole on the bottom of the incense cone must align with the hole on the metal cup or burner in order for the incense to flow properly.

The flowing effect requires a still environment. Therefore, the burner should be placed inside a room that is free from drafts/moving air (such as rooms with fans, air conditioners, heavy foot traffic, etc.).

Use backflow cone incense only. Standard cone incense will not create the flowing effect.

Once incense is burned, there may be some light residue on the metal cup and/or mist path. This is caused by natural oil precipitate and is considered normal. Use a wet cloth to remove the residue should you wish to clean the burner.

Keep the hole in the metal cup clean and free from obstruction.

For indoor use only